BMRLH - COPPER (II) FLUORIDE
- MSDS: BMRLH
- Manufacturer: JOHNSON MATTHEY AESAR GROUP
- Product Name: COPPER (II) FLUORIDE
- National Stock Number: 6810-00N026157
Product Identification
Product ID:COPPER (II) FLUORIDE
MSDS Date:01/29/1988
FSC:6810
NIIN:00N026157
MSDS Number: BMRLH
Responsible Party
SEABROOK, NH 03874
US
Emergency Phone: 800-562-6236;800-424-9300(CHEMTREC)
Info Phone: 603-474-5511
Cage: 1AH72
Contractor
Telephone: 603-474-5511
Cage: 1AH72
Ingredients
FLUORIDES, AS F
CAS: 16984-48-8
RTECS: LM6290000
OSHA PEL 2.5 MG/M3 (AS F)
ACGIH TLV: 2.5 MG/M3 (AS F)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO SPECIFIC TOXICOLOGICAL DATA
AVAILABLE FOR THIS COMPOUND. PENDING EXPERIMENTAL DETERMINATION OF
TOXICITY, THIS MATERIAL SHOULD BE TREATED W/CAUTION & DIRECT
CONTACT SHOULD BE AVOIDED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:GET MD. SKIN:FLUSH W/SOAP & WATER. EYES:IRRIGATE
W/WATER FOR AT LEAST 15 MINUTES. GET MD. INHAL:REMOVE TO FRESH AIR.
Fire Fighting
Flash Point:NON-FLAMMABLE
Extinguishing Media:WATER, CO*2, FOAM, OR DRY POWDER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SWEEP UP & TRANSFER TO SUITABLE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EYE & SKIN CONTACT. AVOID
INHALATION. STORE AWAY FROM ACIDS.
Other Precautions:COPPER (II) FLUORIDE IS HYGROSCOPIC; CONTACT W/MOIST
AIR SLOWLY SHOWS BLUE COLORATION BECAUSE OF FORMATION OF THE
DIHYDRATE.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR
CONCENTRATION ENCOUNTERED.
Ventilation:LOCAL EXHAUST:FUME HOOD. OTHER:N(2) FED DRY BOX.
Protective Gloves:POLYVINYL CHLORIDE/NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING AS NEEDED TOP PREVENT
CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:T6
Melt/Freeze Pt:M.P/F.P Text:1742F,950C
Spec Gravity:4.23
Solubility in Water:MODERATE
Appearance and Odor:WHITE POWDER
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CONTACT W/ACIDS MAY PRODUCE HF.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.